Western Ranch Supply


Animal Health & Care Products	ATV Equipment
Livestock Handling Equipment	Livestock ID
Miscellaneous	Shop Parts and Tools
Shovels, etc.	Show & Grooming Supplies
Tack Department	Toy Line

Livestock Handling Equipment : Gates & Latches

Click on images for a larger view.


Ranchers Buddy Gate Latch Custom Ranch Design Uses 3 ft of chain which makes it full adjustable. It can be installed in just a few minutes. Put the link on desired tension and you are finished. Padlock can be used to lock gate if desired. Constructed of high quality steel and welded so there are no pins to fall out or bolts to come loose. Forest green color. Mounting instructions included. SPDGL $ 18.50

Lemsco 4 Ft. Bow Swing Gate Two-W Livestock Lemsco gates are constructed primarily of 1 1/2" outside diameter 14 gauge high tensile steel. Measurements for gates are gate openings - add 1 foot for post centers. All gates have 5 horizontal rails., are a 5' high gate with a frame and overall clearance is 6' 10". They come with 30" of chain attached and a chain latch. Primary use is for flow control in narrow alleys and access to pens, corrals or alleys. All gates are all coated with a unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions. TWW3082 $ 165.00


8ft Panel with 4' Gate Two-W Livestock 8' panel with a 4' gate insert. 2" 13 gauge tube, 60" tall. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo, and horses. TWW3121 $ 300.00


10ft Panel with 4' Gate Two-W Livestock 10' panel with a 4' gate insert. 2" 13 gauge tube, 60" tall. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo, and horses. TWW3122 $ 310.00


12ft Panel with 4' Gate Two-W Livestock 12' panel with a 4' gate insert. 2" 13 gauge tube, 60" tall. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo, and horses. TWW3124 $ 335.00

Two W 500 Series 8 Ft. Gate with Latch Two-W Livestock The 500 series gates are constructed of all 2" outside diameter 13 gauge high tensile steel. Available sizes are 8, 10 and 12 foot lengths. Measurements are to post centers. All 500 Series gates have 6 horizontal rails. They are a 6' high panel with a 4' wide by 6' high gate. The overall clearance is 6' 10". The gates come with a plunger latch installed with an option of a horse back latch. Primary use is for a "man gate" access to pens, corrals or alleys. All gates are coated with a unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions. TWW3154 $ 260.00


10 Ft 500 Series Gate With Horseback Plunger Latch Two-W Livestock 10' heavy duty gate with piston latch (141lbs). 13 gauge x 2" round tubing, 60" tall. This gate has a 13" x 1" threaded bolt hinge. Actual length of the gate is 9' 6". The latch is a horseback latch installed and used in conjunction with post mount striker plates. Post mount striker plated can also be welded to steel posts. This gate comes WITHOUT the striker plate. 141 lbs. TWW3155 $ 285.00


12Ft 500 Series Gate With Horseback Plunger Latch Two-W Livestock 12' heavy duty gate with piston latch (141lbs). 13 gauge x 2" round tubing, 60" tall. This gate has a 13" x 1" threaded bolt hinge. Actual length of the gate is 11' 6". The latch is a horseback latch installed and used in conjunction with post mount striker plates. Post mount striker plate can also be welded to steel posts. This gate comes WITHOUT striker plate. TWW3156 $ 300.00

Two W 400 Series 18 Ft Heavy Duty Gate with chain Two-W Livestock Constructed of 2" outside diameter, 13 gauge high tensile steel. 3' opening size. Five horizontal rails. 5' High when mounted the recommended 1 foot high. Designed to hang on a wooden post or wall. All the gates come with two 13" bolts mounted on the hinges. All you have to do to mount the gates is to drill two 1" holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. All gates also come with 30" of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open. Coated with gray powder paint and then baked for a long-lasting finish that stands up to the most severe climate and weather conditions. TWW3168 $ 325.00

Two W 500 Series 32 Inch Alley Control Swing Gate Two-W Livestock 500 Series gates are constructed of all 2" outside diameter, 13 gauge, high tensile steel. They are available in 32" and 38.5" sizes. All 500 series gates have 6 horizontal rails and have a 6' high gate with a clearance of 6'10" for the frame. Alley control gates do not require posts as each vertical has 3-way pins and clips. They come with a plunger latch installed with an option of a horse back latch. The primary use is for gates in narrow alleys in high pressure areas for large cattle and buffalo. One of the more common uses in in Rodeo Systems. All alley control gates are coated with a unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions. TWW3197 $ 280.00


8' Bow Gate Two-W Livestock 8' 400 Series gate is 9' 6" tall and constructed of 2" 13 gauge tube. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo and horses. TWW3198 $ 395.00


10' Bow Gate Two-W Livestock 10' 400 Series gate is 9' 6" tall and constructed of 2" 13 gauge tube. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo and horses. TWW3199 $ 400.00


12' Bow Gate Two-W Livestock 12' 400 Series gate is 9' 6" tall and constructed of 2" 13 gauge tube. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo and horses. TWW3200 $ 425.00


8' Bow Gate Two-W Livestock 8' 500 Series gate is 9' 6" tall and constructed of 2" 13 gauge tube. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo and horses. TWW3202 $ 415.00


10' Bow Gate Two-W Livestock 10' 500 Series gate is 9' 6" tall and constructed of 2" 13 gauge tube. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo and horses. TWW3203 $ 425.00


12' Bow Gate Two-W Livestock 12' 500 Series gate is 9' 6" tall and constructed of 2" 13 gauge tube. Interior rails are pinched and spokes are saddle welds. Designated sizes are to the post centers. Mounts on seperate posts or the alley control frames and alley control gates. This heavy duty equipment has been used for many applications including cattle, buffalo and horses. TWW3204 $ 435.00

Two W 18 Ft. Farm Gate with Chain Two-W Livestock Constructed of 1.5" outside diameter, 14 gauge high tensile steel. Measurements are opening size. 5 horizontal rails and 1 row of vertical spokes. 5' high when mounted the recommended 1 foot high. Designed to hang on a wooden post or wall. Comes with two 13" bolts mounted on the hinges. All you have to do to mount the gates is to drill two 1" holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. Comes with 30" of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open. All panels are coated with a unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions. TWW3333 $ 250.00

10 Ft. X 7 Ft. 8 In. Lemsco Bow Swing Gate Two-W Livestock The Lemsco Series is Two-W's medium duty portable line of panels and gates. It is one of the best panels on the market for low pressure areas or low cost perimeter fencing. The Lemsco equipment is constructed primarily of 1.5 inch 14 gauge high tensile tube and does not require posts and connects to each other. This makes the Lemsco line a very popular item for people that require high portability. 5' High gate with a frame. Clearance is 6' 10". Constructed of 1.5" outside diameter 14 gauge high tensile steel. Have 5 rail horizontal rails. Comes with 30" of chain attached and a chain latch. TWW3391 $ 485.00

12 Ft. X 7 Ft. 8 Inc. Lemsco Bow Swing Gate Two-W Livestock The Lemsco Series is Two-W's medium duty portable line of panels and gates. It is one of the best panels on the market for low pressure areas or low cost perimeter fencing. The Lemsco equipment is constructed primarily of 1.5 inch 14 gauge high tensile tube and does not require posts and connects to each other. This makes the Lemsco line a very popular item for people that require high portability. 5' High gate with a frame. Clearance is 6' 10". Constructed of 1.5" outside diameter 14 gauge high tensile steel. Have 5 rail horizontal rails. Comes with 30" of chain attached and a chain latch. TWW3392 $ 510.00

10 Ft. X 7 Ft. 8 Inch Lemsco Bow Swing Gate Two-W Livestock Lemsco High Pole are constructed of 1.5" outside diameter 14 gauge high tensile steel. Available sizes are 8, 10 and 12 foot lengths. (Measurements are to pin centers). Lemsco High Pole Gates have 5 horizontal rails and they have 1 row of vertical spokes. They are 5' high when mounted and require no posts. The overall clearance is 6'10" for the standard high pole and 8' 8" for horseback. Lemsco High Pole Gates come with 30" of chain attached and a chain latch. Primary use is for gates in corrals and penning with low pressure from cattle or horses. One of the more common uses is in low cost roping arenas. All gates are coated with a unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions. TWW3412 $ 430.00

Two W 12 Ft. 7-Bar Gate with Plunger - SPECIAL ORDER Two-W Livestock 600 Series corral gates are constructed of 2" outside diameter 13 gauge high tensile tube. Available sizes are 4, 6, 8, 10, 12, 14 & 16 foot lengths (measurements are opening size). All 600 series corral gates have 7 horizontal rails and the 10 and 12 foot have 1 row of vertical spokes. The 14 & 16 foot panels have 2 rows of vertical spokes. The 4, 6 & 8 foot panels have no vertical spokes. 600 Series corral gates are 7 feet high when mounted the recommended 1 foot high. This gate line is designed to hang on a wooden post or wall. All the gates come with two 13" bolts mounted on the hinges. All you have to do to mount the gates is to drill 2 - 1" holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. All the gates also come with 30" of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open. This heavy duty 600 series equipment has been used for many applications, from cattle and buffalo, to horses as well, with many systems set up in ranching, feedlot, Rodeo and Auction Market applications. There are many systems in use from Alaska all over the northern and Central U.S., most of Canada and some in Europe. All 600 series equipment is coated with a unique gray powder paint system and then baked for a long lasting finish that stands up to the most severe climate and weather conditions. CALL FOR PRICING. TWW3512 $ 435.00

Two W 12 Foot Split Calving Swing Gate Two-W Livestock The split gate is constructed of 2" outside diameter 13 gauge high tensile steel. Available sizes are 8' lengths. Measurement is opening size. It has 5 horizontal rails, 1 row of vertical spokes and is 5' high when mounted the recommended 1' high. This gate fits on a wood post or wall. The main feature of this gate is that you can open either the top half or bottom half independent of each other. The split gate may be used for doctoring cattle or mothering calves or can be used as a creep fence or gate to allow calves through while holding cows back. All the gates come with 2 - 13" bolts mounted on the hinges. All you have to do to mount the gates is to drill 2 - 1" holes. One of the hinges will slide to allow for some inaccuracy in drilling the holes. It comes with 30" of chain with one end welded to the gate. There is also a chain latch to receive the chain for securing the gate closed. The latch has a skewed slot to minimize the livestock or horses from rubbing the latch open. Primary use is corrals and penning for high pressure areas for large cattle, buffalo and horses. All panels are coated with a unique gray owder paint system and then baked for long lasting finish that stands up to the most severe climate and weather conditions. TWW3663 $ 350.00